Capability of Models

The effectiveness of the DI process is determined by measuring the resistivity/conductivity of the deionized water, many times measured in parts per million (PPM). Water quality from deionizers varies with the type of resin, feed water quality, flow, efficiency of regeneration, remaining capacity, temperature, etc.

The TDS of the water source will help to determine local capacity of your unit and output of our deionizer to indicate when change-out is necessary can be done easily with our simple to use meter provided. The TDS can range from zero to 1000 PPM. The frequency for refilling is dependent upon the TDS of the water source, flow rate and the gallons used per application.

Compact and lightweight at only 18 pounds, this deionizer measures 6 ¾" in diameter by 22" in height. The unit contains ¼ cubic feet of high grade virgin mixed bed resin. This unit is easy to hook up or remove depending on your application. Works great in the garage, laboratory, on the road or anywhere you need deionized (DI) water. Unit comes complete with the deionizer, 4' high pressure hose, hand-held TDS meter, shut-off valve, and a cap/plug for the inlet/outlet.

The unit is made up of dual tanks using two difference premium resin products. The first tank in the series contains ¼ cubic feet of cation resin and the second tank contains ¼ cubic feet of anion resin. When running these tanks in series you produce approximately 2 ½ times more water and will reduce your operating cost by 50% compared to the single tank mixed bed deionizer. The dual tank will save you money and give you a great return on your investment. The dual tank model comes with all the necessary fittings including a polypropylene cam lever for easy hook-up and only needs a 10" by 20" compact area. Unit weighs a mere 36 pounds. Unit comes complete with the deionizers, 4' high pressure hose, hand-held TDS meter, shut-off valve, and a cap/plug for the inlet/outlet.